Also referred to as a static, line or stationary concrete pump, a trailer mounted pump the type of pump that may be typically associated with just one or multi-axle trailer. This kind of concrete pump is generally then mounted on a car that can keep the weight in the pump and transferred to the spot where there exists a construction project.
How Does This Particular Pump Work?
These types of concrete pumps normally have a concrete pumping capacity(capacidad de bomba de concreto) that generally ranges between 30 cubic meters to 135 cubic meters each hour. When choosing a trailer mounted pump, you should be guided by the needs at your construction site.
Once relocated to a construction site with a vehicle, concrete is often pumped through flexible pipes under high-pressure and directed to where it can be needed.
Even though the concrete pump has only one end, several pipes may be attached using the requisite coupling. This essentially signifies that different areas with the construction site could be served by one pump without the need of moving the ensemble throughout the workplace. When several pipes are used, they are usually controlled by construction workers with the output area but the input could be controlled from a gate valve in order that just the pipes have been in use have got a discharge.
Inside a construction site, it is wise to ensure that you place the trailer concrete pump within an easy to access area to ensure mixers nearby can feed it easily. If you want to get a steady and velocity flow of concrete when using a line pump, you must be sure that the pump always includes a steady feed of concrete.
Advantages Of Using a Trailer Concrete Pump
This kind of pump is very flexible(flexible) in that you can attach any number of pipes and serve any area inside your construction. Because of this there is no need to maintain moving the towing vehicle and concrete mixing plants any time you make positive changes to construction area.
Since this sort of concrete pump might have many pipes attached at the same time, this means that exist work done two times as fast. By using a static pump, you simply will not have any downtime with the workers. Your labor force can be at work all at one time.
Another benefit of those pumps would be that the velocity of concrete flowing with the pipes can be adjusted when necessary. Additionally, you can also shut or turn on flow to pipes as per your requirements. If you are using this type of pump, also you can lengthen or shorten the attached lines depending on the area you where construction has been performed. In other words, it includes contractors more convenience.
With a static pump, you can easily pump concrete vertically around 400 meters and concurrently, it is possible to pump horizontally for as much as 2,000 meters without hassle. This is certainly unlike other kinds of pumps where you will have to use pulleys or other kinds of conveyer belts to get concrete where it is actually needed.
Apart from the fact that concrete could be taken where it is necessary in a jiffy, this sort of pump can also be used in construction projects where conventional concrete mixing plants should not be used such as during the making of tunnels or other underground spaces.
More info here: https://aimixgrupo.com/bomba-de-concreto-estacionaria/