The Properties of the Plastic Pyrolysis Recycling Plant

Pyrolysis the world’s best solutions to the growing amount of plastic waste. It can be termed as the thermo-chemical decomposition of waste organic materials at high temperatures in the absence of air. Pyrolysic is a kind of thermolysis that is irreversible and involves simultaneous changes of chemical compositions and physical phase. In the tyre pyrolysis plant, waste plastics are used to obtain products of high value. It produces liquid and gaseous products and then leaves behind a solid residue that is high in carbon content, char. What makes this process different from the other ones like combustion and hydrolysis is that pyrolysis does not involve reactions with water, oxygen, or reagents.

The pyrolysis plastic recycling process

The plastic pyrolysis plant recycling process involves thermal decomposition in the absence of air. The waste plastics are heated in high temperatures  and, therefore, causing their molecules to break down into very smaller molecules. This results in the formation of a variety of hydrocarbons. First,  the plastic wastes are fed into the reactor. The fuel materials which include coal, wood, oil, or natural gas are then burned to heat the reactor. The  reactor starts to heat slowly and when it reaches around 250 degrees Celsius, oil gas is produced.

The plastic oil is now put into the oil distillation plant to undergo further processing. It is then heated in a non-oxygen environment which causes it  to boil and evaporate. The oil gas is processed by the technology and then goes to the cooling system to be liquid oil. It is passed through a large  cooling pipe where it then condenses to form a liquid. It is here where the oil is now led to a deep purifying system system with alkaline and acidity  cleaning device and a pressures system. This system removes various particles including colloidal matters, odor, and acid from the oil leaving it clean  and with a qualified smell. There are some gases which cannot be liquefied under normal pressure. These gases go back to the combustion system to  replace the fuel material to burn the reactor. This makes the process more environmental friendly and energy saving. Now, after oil production has been  finished, the temperature of the reactor will be now down. When the temperature of the reactor reaches 40 degrees Celsius, Carbon black can be  discharged automatically. Finally, the smoke that is produced when the reactor is heated can achieve national emission standard through the advanced deducting system. Ask pyrolysis plant suppliers for more details on the working process.

Advantages of the plastic scrap recycling machinery

-It offers continuous pyrolysis technology for high efficiency and improved safety.

-It is raw material flexible since it can use both waste plastic and tires which are also very cheap.

-The cost of production is very less.

-It offers up to 95 percent conversion of plastic waste into fuel oil.

-It uses advanced catalyst to improve the efficiency of the process, increase the quality and quantity of oil, and reduce coke yield.

-It requires low operational manpower since it is a completely automated plant operation.

-It is a standardized plant that uses the latest technology and comes in a very good price. Click here to know more: https://bestoncompany.com/.

If you don’t need to process too many solid wastes, you can choose small scale plastic recycling machine and it will save you a large amount of money.